Test Point Interface Identifier
Work from what is already on the machine. Four answers are enough to name the standard family, the
stud-end family and whether a gauge can go on while the circuit is live.
1. What does the diagnostic connection look like?
A threaded nipple you screw a hose onto, roughly M16
A flat-faced push-on coupler
Not sure yet
2. What is the port thread it screws into?
M14 x 1.5 with an O-ring seal
M14 x 1.5 with an elastomeric seal
G 1/4
7/16-20 UNF
Not sure yet
3. What thread is on the gauge or instrument you will fit?
BSPP
NPT
JIC 37 degree
ORFS
Metric
Not sure yet
4. Do you need to take the reading with the circuit running?
Yes, the machine stays live
No, the circuit can be shut down
Identify the interface
Answer the four questions and the summary appears here.
What To Do With This
Copy the summary into your enquiry, or open the
six-input RFQ brief builder to turn it into a
complete request. Pressure figures are separated in the
pressure unit and class converter .
Back to hydraulic test fittings ·
Request a quote
